产品详情

Digimatic/RS-232C Interface Unit Multiplexer MUX-10F — 264-002

Spesifikasi resmi MAP25 E2025; keluarga produk: Digimatic/RS-232C Interface Unit Multiplexer MUX-10F; referensi katalog: 09-21. • Multiplexer MUX-10F is a measurement data transfer device that converts incoming Digimatic output measurement data to RS- 232C and outputs it to other devices such as a PC and sequencer. 264-002 MUX-10F Code No. 264-002* Model MUX-10F Data input port 4 channels for Digimatic gages • Up to four measuring instruments with Digimatic output can be connected. SPECIFICATIONS Connector specification 12345 6789 Pin No. Signal Function in/out 1 CD out 2 RD Received data out 3 TD Communication data in 4 5 GND Ground 6 DR out 7 8 CS out 9 Note: For connection with a PC, use a commercially available RS-232C straight cable. Output: (RS-232C) Data transmission method: Half-duplex, Data transmission code: ASCII/JIS, Data length: 8 bits Parity check: None, Stop bit: 1, Data transmission speed: 300/600/1200/2400/4800/9600/19200 bps Power source AC adapter (9 V, 500 mA) External dimensions 91.4 (W) ×92.5 (D) ×50.4 (H) mm Data format 1) When data output D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 * To denote your AC line voltage add the following suffixes. A for North America, D for Europe, E for UK, K for Korea, DC for China, and no suffix is required for Japan. Note 1: Communication software is not included. Note 2: Separately purchase the cables. Refer to pages 09-23 and 09-24 for cable types. Measurement item: A LSD (Floating decimal point) Model: + or – CR Channel No.: 1 to 4 Typical Application RS-232C (ASCII code) Data format code No.: 0 2) Example of format PC MUX-10F Display (CH1) Display (CH2) -0.018 0.1234 Digimatic output Data input using the data button on the Digimatic gage • If the Digimatic gage has a data button, data is sent to the MUX-10F from the gage, converted to RS-232C and sent out.