产品详情

Bore Gages SERIES 511 — 511-754-20

Spesifikasi resmi MAP25 E2025; keluarga produk: Bore Gages SERIES 511; referensi katalog: 08-38. 0.063 5 or less 10 or less 511-754-20 4.0 - 6.5 511-755-20 6.5 - 10.0 6 or less 15 or less 511-756-20 10.0 - 16.0 511-741-20 0.7 - 1.4 0.047 9 pcs. 2 pcs. Not supplied 1 pc. 4 511-752-20 511-732 6 pcs. 4 pcs. Not supplied 6 511-753-20 511-733 11 pcs. 1 pc. 511-754-20 511-734 13 pcs. Not supplied 511-755-20 511-735 6 pcs. 7 pcs. 10 511-756-20 511-736 5 pcs. 1 pc. 511-741-20 511-731 0.063 5 or less 10 or less 511-744-20 4.0 - 6.5 511-745-20 6.5 - 10.0 6 or less 15 or less 511-746-20 10.0 - 16.0 511-931-20 0.7 - 6.0 See SPECIFICATIONS of 511-731/732/733 511-932-20 511-935-10 • The ID measurement can be performed easily since the minimum value is detected automatically. • Up to three combinations of master and tolerance values can be set. • Nine measurement results (maximum) can be saved and recalled from memory (when no external device is connected). Refer to page 07-15 for details. • Metric type: 543-700B (0.0005 mm) • Inch type: 543-702B (0.0005 mm/0.00002 in) • When using with 543-700B or 543-702B, modification of the setting is required. Refer to page 07-5 for details. 2922AB 21DZA000 See SPECIFICATIONS of 511-731/732/733 511-932-20 2923AB-10 511-935-10 543-312B * Accuracy of the bore gage alone. Note 1: A 2" sub-anvil is supplied with 511-733, and a 3" sub-anvil is supplied with 511-736. Note 2: It is not permissible to use a sub-anvil other than as supplied as a standard accessory, or widen a measuring range by using multiple sub-anvils. (The measurement accuracy in such cases is not guaranteed.) 4 or less 6 or less 511-752-20 1.4 - 2.5 511-753-20 2.0 - 6.0 0.00008 0.00002 0.00004